Відео

I am on the job and pretend like I know what I am. Thank you Stihl

I didn’t realize it was a add and I was like this should be a add

Thank you just picked one up today. Didn't want to just keep pulling on it.

I don’t even own this machine yet I watched the video in full. Boredom knows no limits

Finally an actual vidio thatx you and not a scam

How does the suspension work ⁉️ Does the cutting surface go up and down with the rest of the mower.

Sthil is farm boss u But husqvarna în forest king

Yooo 👍🥇

This is possibly one of the worst instructional videos I’ve ever seen. How about you guys just send decent instructions with your products instead of being cheap on your production end of things? I put these together for a living and they’re always stupid to try to put together. Every other manufacturer sends instructions that adequately explain how to assemble the tool. You guys are like, yeah, make sure your chains on tight. Mkay! You’re ready to go! We’ll HTF do you do that successfully.

Jesus dude, you have a small channel not a crispy edge 😂😂

It would be nice if you could actually show it cleaning a dirty concrete surface. 🤦

Love to demo this 🔥🔥

The bump release drives me nuts

Can you put this on an FS 38 model?

There's only 3 things stihls good at weed eaters,blowers and chainsaw stick to the 2 strokes and let the real bad Boyd work there magic that's called TORO

Only time you ever need a primer bulb is if your lines are dry. If your lines have fuel in it you can just engage the choke and follow thru with the rest of the starting procedure. Some of my high end models don’t even have primer bulbs

Couldn't you narrate 🤦‍♂️

Nice mice

This is great except it takes about 1 minute of use for the line to break off inside the spool so you have to take the whole head off to fix it. Also the bump advance stopped working very early regardless of respooling.

Really well done and so much better than a paper instruction manual! Thank you! 👍

Thsnk you I watched your video first , then another from Australia exact same method ,but they spooled theirs to the right , does it make a difference i always spun mine counter clockwise with a different method

What to do when the cylinder of a stihl 172 chainsaw is flooded / won't start? How do you do this on the 172, since its switch is spring-loaded and doesn't lock in the off position?

Noooo! 😂

Had my 271 farm boss since 2013 I love it

Thanks to this decision we no longer have simplicity ZT's. They stopped them to make these..

Word!

Iwould likes to by IT. You don't know where you don't where?

How Much $$$

Fortunately, I live in an area where ethanol free gas is in abundance.

My Stihl blower LK 45 won't charge/ can't keep a charge?

Did you get rid of.the bushing.in the crank and go to a real roller or needle bearing. A bushing is a joke.

What centers the blade on the spindle? The blade hole is much larger than the spindle diameter.

This will only work if your FHA 57's serial number starts with a 5. If it starts with a 9, you'll need to use a different spool.

Props for the flashlight Negative on no pews or at least a spare bag or two

Best advertisement for the chinese clone saws that I have seen.

Razor sharp chain . Take that file combo and leave it on the shelf !! Ok, Put a file guide on your file , this will sharpen the tooth , now, remove the guide and thus will sharpen the gullet under the tooth . U will be amazed how fast your saw will cut and how long the chain stays sharp .

We should not at all squeeze and lock the throttle before igniting the machine!!! It ran and ramped directly to full power and the throttle was not unlocking, the machine became uncontrollable and created damage around me, it was even about to injure me. What a wrong and dangerous advice?!!?! Simply tell us to ignite it on the idle, it works very well!

Great looking mower but expensive .

He'll yeah.... hire me asap

Why did you actually tell us about the pressure washer in a company video?

How to charge clippers

I have the STIHL BG86 CE I had it since December 25th so it’s been almost 6 months since I had it. I love it a lot.

Why did the landscaper switch to battery-powered tools for his comedy routine? Because he wanted his jokes to be as *shocking* as his trimmers!

This trimmer head is garbage. Very frustrating changing the line every 5 minutes. My Echo finally died but it had a speed-feed head which lasted hours and was a whole lot easier to reload. I can't seem to find one for my new Stihl FS70R. It should be standard from the factory.

For anyone looking into one of these, I have to do a forearm workout from having to squeeze so hard for its top speed. The grip/handle needs to be thicker so that the trigger actually sits at the tip of your finger, vs falling in the middle of your finger. May be fine if your have abnormally small hands, but it gets uncomfortable after about two minutes squeezing that trigger for the highest speed

I’d never buy this thing, because there’s better options out there imo, but the amount of incompetent boomers in this comment section is ridiculous

One thing that will MAKE zero turns the winner is this.... a MULCH door that actually is easy, preferably included with unit and NOT made of composite plastic! Just a simple door that you bungie on or use a lever! REASON...My John Deere Z345M zero turn is a WORKHORSE but it is bad as the kit is 400 dollars for plastic and gets destroyed in no time and without it destroys my farms metal sided buildings, house and my vehicles with DENTS from FLYING ROCKS! I want this machine GONE!

I would love to have a free one and start my business 🙏

Looks like they copied Ferris